Meshforce M3s Mesh WiFi System


  • Meshforce’s Flagship Mesh WiFi: Here is M3s Mesh WiFi System upgraded from MeshForce M1 and M3, equipped with all gigabit ethernet and even greater coverage. The dual band WiFi creates a super powerful wireless network for entire home. Capable for up to 60 devices so everyone can enjoy seamless, flawless and fast Internet.
  • Your WiFi Jumps to Next Level: A true router replacement, as well as the wireless technology. With all new mesh WiFi technology, relax and enjoy seamless & secured single-SSID WiFi, just walk across your home and full WiFi all the time. 6+ bedrooms coverage and extension available, from basement to living room, door to backyard. Whole home, stay connected.
  • Quick and Simple Setup: With My Mesh mobile app, setup your new M3s WiFi system in only 10 minutes. Remote management allows you see and control the WiFi status even when you are outside. Guest WiFi, parental control and more advanced features, discover in the App.
  • Gigabit, Flexible, Secure: For the first time, M3s deploys full gigabit ethernet and more powerful wireless broadcasting performance. Also compatible with MeshForce M1 point and M3 dot, so you can extend the range with more choices. Encrypt WiFi password with WPA2-PSK, protect your smart home and connections from hack and attack.
  • Control in the Palm of Hand: Simple but smart app helps you to see connected devices, creates isolated guest WiFi zone, manage your kids’ Internet access by device and period.
Meshforce m3s


Hardware Features

Standards: IEEE802.3, IEEE802.3u

1 x Gigabit LAN/WAN Ethernet port,
1 x Gigabit LAN Ethernet port ;
WAN and LAN on primary mesh node; Both act as LAN ports on additional mesh points.

Antenna: 2 x 3 dBi built-in omni-directional antennas
Button: 1 x Reset button
Power Input:100-240 V, 50/60 Hz, 0.6 A Output: DC 12 V == 1 A
Dimensions & Weight: 91 mm x 91 mm x 93 mm (3.58 in. x 3.58 in. x 3.66 in.) M3s: 207g/a

Wireless Features

Wireless Standards:
IEEE 802.11ac/a/n 5GHz
IEEE 802.11b/g/n 2.4GHz

Data Rate
5GHz: Up to 867Mbps
2.4GHz: Up to 300Mbps

Frequency: Simultaneous dual band 2.4GHz & 5GHz
Basic Features:
SSID Broadcast;
Beamforming MU-MIMO

wireless Security: WPA2-PSK (default)
Wireless roaming: Compliant with IEEE 802.11k/v/r

Software Features

Internet Connection Type PPPoE, Dynamic IP, Static IP, Bridge Mode
QoS: Support Smart QoS
DNS: Support manually setting DNS server

Virtual Server:
Port Forwarding;

DHCP Server:
DHCP Server;
DHCP Client List

Forbid UDP ood attack;
Forbid TCP ood attack;
Forbid ICMP ood attack

IPsec pass through
PPTP pass through
L2TP pass through

Parental Control
Guest Network
Firmware upgrade online
Reset to factory settings

Setup Requirements: Download “My Mesh” on iOS or Android device. A mobile device running Android 4.0+ or iOS 8+

Meshforce m3s with secure connection


Operating Temperature: 0℃ ~ 40℃
Storage Temperature: -40℃ ~ 70℃

Operating Humidity:10% ~ 90% RH non-condensing
Storage Humidity: 5% ~ 90%RH non-condensing

Certicates FCC, CE, RoHS, EAC, IC

Package Contents
Mesh WiFi points (1 or 3)
Power adapters (1 or 3)
Quick install guide *1
Ethernet cable *1

Use this coupon code MQOZSBDSO to get 10% off for Meshforce M3s when you purchase from this link !


Available coupon codes for other Meshforce products:

  1. Meshforce M3 with two Satellites use this code MQ4617351 for 10% off.

2. Meshforce M1 use this coupon code MQOZSBDSO to get 10% off from the following link.


See also:

TP-link Archer AX50 AX3000 Wi-Fi 6 Router and Linksys MX10 Velop AX Whole Home WiFi 6 System

You may also like...

Leave a Reply

Your email address will not be published. Required fields are marked *