- Dual band WiFi
- 2.4Ghz (2×2 MIMO) & 5Ghz (2×2 MIMO)
- WiFi capacity: AC1200
- Nokia WiFi mesh & seamless roaming
- Simple, app-based setup
- Bridge mode and hybrid backhaul
- Works with Nokia WiFi app
Nokia WiFi uses the latest AC1200 WiFi standard to give you peak performance. The Beacon 1 detects both WiFi and non-WiFi interference and uses Intelligent Channel Selection to always choose the best channel and band. So if there is any interference from your neighbor’s WiFi, your microwave oven or a Bluetooth speaker, the Beacon 1 knows how to avoid it.
Nokia WiFi Beacons use digital fingerprinting to identify the types of device connected to it and provide the best quality of service to each. For example, it can prioritize bandwidth while you’re watching Netflix on your 4K TV or choose the shortest available path through the WiFi network when you’re moving about your home streaming Spotify on your smartphone.
Most in-home WiFi solutions have extenders connected to a master device making all the decisions, routing all traffic and slowing things down. With Nokia WiFi Mesh technology, all beacons are equal, talking to each other and working together to give all your devices the best connection possible.
4k videos without buffering
Watch lag-free videos on all your devices simultaneously with Nokia Intelligent Channel Selection.
Nokia WiFi Mesh technology seamlessly combines Ethernet, 5GHz and 2.4GHz to connect your beacons, automatically rerouting traffic in 500 ms or less.
Nokia WiFi is designed to make setup a breeze by reducing the number of steps you need to go through before your network is up and running. You can plug and play your beacons out of the box or download the Nokia WiFi app to go through a guided setup.
Mesh Network at its best
When you buy a multi-pack, beacons are pre-matched so that installing the 2nd or 3rd Beacon is as simple as plug & play. Just turn them on and the first beacon will connect to the others. The colored LEDs guide you to the perfect spot for your additional Beacons, up to 2 rooms away from the first
- Height: 150 mm (5.9 in)
- Width: 115 mm (4.5 in)
- Depth: 42 mm (1.6 in)
- Weight: 0.28 kg (0.62 lb)
Temperature: -5°C to 45°C (23°F to 113°F)
Relative humidity: 5% to 95%, non-condensing
Local powering with 12 V DC input (external AC/DC adapter)
- Nominal: 4.9W
- Maximum: 11.5W
IPv4 and IPv6 connectivity: Dual stack and DS Lite, stateless and stateful auto-configuration, DHCPv6 prefix delegation
Point-to-Point Protocol over Ethernet (PPPoE) and IP over Ethernet (IPoE)
Network Address Translation (NAT), port forwarding, demilitarized zone (DMZ) and firewall
Dynamic Host Configuration Protocol (DHCP), domain name system (DNS) proxy and dynamic domain name system (DDNS)
Internet Group Management Protocol (IGMP) v2/ v3 proxy Multicast Listener Discovery (MLD) proxy
Virtual private network (VPN) pass through for Point-to-Point Tunneling Protocol (PPTP), Layer 2 Tunneling Protocol (L2TP) and IPSec
- Supports 2×2 802.11b/g/n 2.4 GHz wireless LAN (WLAN) interface
- Supports 2×2 802.11ac 5 GHz WLAN interface
- Maximum effective isotropic radiated power (EIRP) on 2.4 GHz up to 500 mW and 5 GHz up to 1 W
- 64-bit and 128-bit Wired Equivalent Privacy (WEP) support
- WiFi Protected Access (WPA) support including Pre-Shared Key (WPA-PSK) and WPA2
- Media access control (MAC) filters
- One 10/100/1000Base-T interface with RJ-45 connector for WAN side
- One 10/100/1000Base-T interface with RJ-45 connector for LAN side
Made for the world you live in
Beacon 1 prioritizes your Wi-Fi speed, automatically switching Wi-Fi channels and frequency always delivering the peak performance to your devices.
Nokia WiFi gives your devices the best connections by avoiding congestion and Wi-Fi interferences.
Designed for all homes
The Beacon 1 mesh system provides coverage up to 4500 square feet and eliminates dead zones providing wall-to-wall blazing fast internet speeds.
Depending on the size of your home, one, two or three beacons create a blanket of Wi-Fi coverage creating the perfect home network.
Get the Nokia WiFi app
The Nokia WiFi mobile app makes installation and management of your network simple. Just scan the QR code on the bottom of your beacon and follow the instructions to get your network up and running. Once your network is running use the simple app interface to manage your network.