TP-LINK CPE510 5GHz 300Mbps 13dBi High Power Outdoor CPE-Access Point
Highlights
- Built-in 13dBi 2×2 dual-polarized directional MIMO antenna
- Adjustable transmission power from 0 to 27dBm/500mw
- System-level optimizations for more than 15km long range wireless transmission
- TP-LINK Pharos MAXtream TDMA (Time-Division-Multiple-Access) technology improves product performance in throughput, capacity and latency performance, ideal for PTMP applications
- Centralized Management System Pharos Control
- AP / Client / Repeater / AP Router / AP Client Router (WISP) operation modes
- Passive PoE Adapter supports up to 60 meter (200 feet) Power over Ethernet deployment and allows the device to be reset remotely
Technical Specs
HARDWARE FEATURES
Processor
- Qualcomm Atheros Enterprise AR9350B 560MHz CPU, MIPS 74Kc
Memory
- 64MB DDR2 RAM, 8MB Flash
Interface
- 1 10/100Mbps Shielded Ethernet Port (LAN0,Passive PoE in)
- 1 10/100Mbps Shielded Ethernet Port (LAN1, Passive PoE Passthrough)
- 1 Grounding Terminal
- 1 Reset Button

Power Supply
- Passive Power over Ethernet via LAN0 (+4,5pins; -7,8pins)
Voltage range:
- 16-27VDC
Power Consumption
- 13 Watts Max
Note: When deployed using Passive PoE, the power drawn from the power source will be higher by some amount depending on the length of the connecting cable.
Dimensions ( W x D x H )
- 224 x 79 x 60 mm
Antenna Type
- Built-in 13dBi 2×2 Dual-polarized Directional Antenna
Beam Width:
- 45 degree (H-Plane) / 30 degree (E-Plane)
Note: For more details, please refer to datasheet
Protection
- 15KV ESD Protection
- 6000V Lightning Protection
Enclosure
- Outdoor ASA stabilized plastic material
- IPX5 waterproof Certification
WIRELESS FEATURES

Wireless Standards
- IEEE 802.11a/n (with Pharos MAXtream disabled)
Proprietary Protocol
- TDMA Mode (with Pharos MAXtream enabled)
Wireless Speeds
- Up to 300Mbps (40MHz,Dynamic)
- Up to 144.4Mbps (20MHz,Dynamic)
- Up to 72.2Mbps (10MHz,Dynamic)
- Up to 36.1Mbps (5MHz,Dynamic)
- Frequency 5.15 – 5.85GHz
Note: Available operating frequency may vary depending on the limitations of the countries or regions in which the device is used.
Reception Sensitivity
- 802.11a:
54M: -75dBm, 48M: -76dBm, 36M: -83dBm, 6-24M: -95dBm - 802.11n:
MCS15: -73dBm, MCS14: -74dBm, MCS13: -76dBm,
MCS12: -80dBm, MCS11: -83dBm, MCS10: -88dBm,
MCS9: -90dBm, MCS8: -93dBm, MCS7: -73dBm,
MCS6: -74dBm, MCS5: -76dBm, MCS4: -80dBm,
MCS3: -83dBm, MCS2: -88dBm, MCS1: -90dBm, MCS0: -93dBm
Transmission Power
- 27dBm/500mw (Adjustable power by 1dBm)
Note: Maximum transmission power may vary across different channels depending on the limitations of the countries or regions in which the device is used.
SOFTWARE FEATURES
Wireless Configurations
- Pharos MAXtream TDMA Technology
- 802.11a/n Modes
- Selectable Channel Width: 5/10/20/40MHz
- Automatic Channel Selection
- Transmission Power Control
- Dynamic Frequency Selection (DFS)
- WDS Enable/Disable
- Security: WPA/WPA2, WPA-PSK/WPA2-PSK (AES/TKIP) Encryption, 64/128/152-bit WEP Encryption
- SSID Broadcast Enable/Disable
- Multi-SSID with VLAN Tagging (AP mode only)
- Distance/ACK Timeout Setting
- Wireless MAC Address Filter
- Wireless Advanced:
> Beacon Interval/RTS Threshold/Fragmentation
>Threshold/DTIM Interval/AP Isolation/Short GI/Wi-Fi Multimedia
Management
- Discovery and Remote Management via Pharos Control application
- HTTP/HTTPS Web-based management
- System Log
- SNMP Agent(v2c)
- Ping Watch Dog
- Dynamic DDNS
- SSH Server
System Tools
- Wireless Signal Quality Indicators:
- Signal Strength/Noise/Transmit CCQ/CPU/Memory
- Monitors: Throughput/Stations/Interfaces/ARP/Routes/WAN/DHCP
- Spectrum Analyzer
- Speed Test
- Ping
- Traceroute
System-level Optimizations
- Optimized IGMP Snooping/
- Proxy for multicast applications
- Hardware watch dog
POE ADAPTER FEATURES
Interfaces
- 1 AC Jack with Earth Ground
- 1 10/100Mbps Shielded Ethernet Port (Power + Data)
- 1 10/100Mbps Shielded Ethernet Port (Data)
Efficiency
- >80%
Button
- Remote Reset Button
Certifications
- CE/FCC/UL/IC/GS/PSB/C-tick/SAA/S-Mark/KC-mark
Power Status
- LEDs 0 – 0.8A: Green
- 0.8A – 1.0A: Red
Output
- 24VDC, 1.0A Max
+4, 5pins; -7, 8pins. (Support up to 60m Power over Ethernet)
Input Voltage
- 100VA – 240VAC @ 50Hz – 60Hz
Dimensions(W x D x H)
- 110*57*33.5mm
Input Current
- 0.8A Max @ 100VAC
Input
- 100-240VAC, 50/60Hz
Output Voltage
- 24VDC(+4,5pins; -7,8pins)
OTHERS
Certification
- CE, FCC, RoHS, IPX5
Package Contents
- Outdoor Wireless CPE
- 24V 1A Passive PoE Adapter
- Pole Mounting Straps
- AC Power Cord
- Installation Guide
System Requirements
- Microsoft Windows 98SE, NT, 2000, XP, Vista or Windows 8, Windows 7, MAC OS, NetWare, UNIX or Linux.
Note: We recommend you to use one of following Web browsers for an improved user experience: Google Chrome, Safari, and Firefox. IE browsers are not recommended.
Environment
- Operating Temperature: -30 degree C – 70 degree C (-22 degree F – 158 degree F)
- Storage Temperature: -40 degree C – 70 degree C (-40 degree F – 158 degree F)
- Operating Humidity: 10% – 90% non-condensing
- Storage Humidity: 5% – 95% non-condensing
EoF
See also:
- TP-Link EAP225 V3 AC1350 Wireless MU-MIMO Gigabit Ceiling Mount Access Point
- Wavlink 570HA1 POE High Power Outdoor Weatherproof AP
- Ubiquiti UniFi UAP AC Long Range UAP-AC-LR Single Unit U.S. Version
Competing Products
TP-Link AC1200 Wireless MU-MIMO Gigabit Indoor/Outdoor Access Point (EAP225-Outdoor)