Ubiquiti UAP-AC-PRO-US Unifi 802.11ac Dual-Radio PRO Access Point

Highlights

  • 3 Dual-Band Antennas, 3 dBi each
  • Max. Power Consumption: 9W
  • Networking Interface: 2 10/100/1000 Ethernet Ports
  • Features auto-sensing 802.3af/802.3at PoE support and can be powered by any of the following: Ubiquiti Networks UniFi Switch 802.3af/802.3at PoE+ compliant switch Ubiquiti Networks Gigabit PoE Adapter (48V, 0.5A)
  • Wi-Fi Standards: 802.11 a/b/g/n/ac

Product Description

Capacity: 1 Pack

UAP-AC-PRO-US (Single Pack U.S. Version) . The Unifi AC Pro AP supports simultaneous dual-band, 3×3 MIMO technology in the 5 and 2.4 GHz radio bands. The Unifi AC Pro AP features the latest Wi-Fi 802.11ac, 3×3 MIMO technology in a refined industrial design and is ideal for deployment of maximum-performance wireless networks. The Unifi AC Pro AP is a gigabit, 802.3af-powered access point suitable for indoor or outdoor use. You can easily replace a standard Unifi AP using the same mounting hardware.

802.11ac PRO Access Point

The UniFi AC Pro AP features the latest Wi-Fi 802.11ac, 3×3 MIMO technology in a refined industrial design and is ideal for deployment of maximum-performance wireless networks.

Up to 5X Faster with Dual-Radio 3×3 11AC MIMO Technology

The UniFi AC Pro AP supports simultaneous dual-band, 3×3 MIMO technology in the 5 and 2.4 GHz radio bands.

Designed for Optimal RF Performance

The newly redesigned UniFi Controller optimizes RF performance

  • Spectral analysis: collects feedback on full 5Ghz and 2.4Ghz channel interference
  • Band steering: Pushes clients to faster interference-free, 5GHz channel
  • Airtime fairness: Minimize problem-client effects on system performance by limiting their airtime access

Versatile Design

The UniFi AC Pro AP is a gigabit, 802.3af-powered access point suitable for indoor or outdoor use.

Scalable Enterprise Wi-Fi Management

The UniFi Controller v4 software is a powerful, enterprise wireless software engine ideal for high-density client deployments requiring low latency and high uptime performance. With its software-based capabilities, the UniFi virtual control plane allows for unlimited scalability under one centralized controller. Remotely access the UniFi Controller to upgrade deployed UniFi APs while in the field

Specifications

  • Dimensions: 196.7 x 196.7 x 35 mm (7.74 x 7.74 x 1.38 inch)
  • Weight: 350 g (12.4 oz)
  • With Mounting Kits: 450 g (15.9 oz)
  • Networking Interface: (2) 10/100/1000 Ethernet Ports
  • Port: (1) USB 2.0 Port
  • Buttons: Reset
  • Power Method: Passive Power over Ethernet (48V), 802.3af/803.2at Supported
  • (Supported Voltage Range: 44 to 57VDC)
  • Power Supply: 48V, 0.5A PoE Gigabit Adapter*
  • Power Save: Supported
  • Maximum Power Consumption: 9W
  • Maximum TX Power: 2.4 GHz: 22 dBm; 5 GHz: 22 dBm
  • Antennas: (3) Dual-Band Antennas, 2.4 GHz: 3 dBi, 5 GHz: 3 dBi
  • Wi-Fi Standards: 802.11 a/b/g/n/ac
  • Wireless Security: WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES)
  • BSSID: Up to Four per Radio
  • Mounting: Wall/Ceiling (Kits Included)
  • Operating Temperature: -10 to 70 degree C (14 to 158 degree F)
  • Operating Humidity: 5 to 95% Noncondensing
  • Certifications: CE, FCC, IC

Advanced Traffic Management

  • VLAN: 802.1Q
  • Advanced QoS: Per-User Rate Limiting
  • Guest Traffic Isolation: Supported
  • WMM: Voice, Video, Best Effort, and Background
  • Concurrent Clients: 200+

Supported Data Rates (Mbps)

Standard and Data Rates

  • 802.11a: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
  • 802.11n: 6.5 Mbps to 450 Mbps (MCS0 – MCS23, HT 20/40)
  • 802.11ac: 6.5 Mbps to 1300 Mbps (MCS0 – MCS9 NSS1/2/3, VHT 20/40/80)
  • 802.11b: 1, 2, 5.5, 11 Mbps
  • 802.11g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps

EoF

Ubiquiti Networks Unifi 802.11ac Dual-Radio PRO Access Point (UAP-AC-PRO-US)

Competing Products

 

 

You may also like...

Leave a Reply

Your email address will not be published. Required fields are marked *