Product Descriptions
RX4-1500 Wireless Router can establish 2.4GHz 300Mbps and 5GHz 1.2Gbps connections simultaneously for 1.1Gbps of total available bandwidth , can easily support online HD video playback, 3D games and other high speed applications

Ultra Fast Speed with 1024QAM
New technologies that come with 802.11ax, such as 1024QAM.Improving raw speeds by 25% compared to 802.11ac 256-QAM. This boosts throughput by cramming more data into each packet, allow you enjoy blazing-fast speeds without any lag.
Wi-Fi 6 Technology Featuring Tri-core Processor
Wi-Fi 6 technology achieves up to 3x faster speeds, higher capacity and lower latency compared to the previous generation of Wi-Fi 5 while the power of Broadcom’s Tir-core 1.5GHz processor ensures your experience is smooth and buffer-free.

WPS Pairing
WPS stands for Wi-Fi Protected Setup, it lets you join a secure WiFi network without selecting the network name and entering the password
Multiple Users and Device with MU-MIMO
With OFDMA and MU-MIMO technology, RX4-1500 provides up to 4× higher capacity and throughput compared to standard AC routers in dense usage environments, greatly increasing the number of connected devices.

Smart Parental Control
Smart Parental Control Smart parental controls allows you to easily filter online content and limit online screen time as set an internet bed time for your kids
WPA3 PROTOCAL
WPA technology encrypts user data and protects wireless networks from outside threats

Specifications
WIFI Performance
2.4GHz (802.11n,2*2)
Standard : 2.4GHz: IEEE802.11n/IEEE802.11g/EEE 802.11b
RF Power : MCS7:20dBm
RF Sensitivity : MCS7:-74dBm
Antenna : Two (2) external 2.4G-bandomni antennas 5dBi
Connection rate : 300Mbps
Throughput : 220Mbps
5GHz(802.11ax,2*2)
Standard : 5.0GHz: 802.11ax/802.11ac/IEEE 802.11n/IEEE 802.11a
RF Power : MCS9: 19dBm ; MCS11: 17dBm
RF Sensitivity : MCS9: -61dBm ; MCS11: -54dBm
Antenna : Two (2) external 5G-bandomni antennas 5dBi
Connection rate : 1.2Gbps
Throughput : 850Mbps
Software Feature
Networking Protocols :
802.1q/1p VLAN over RFC2684
bridge encapsulation
PPPoE:
Support AUTO,PAP,CHAP,MS‐
CHAP authentication.Auto or static IP
address assignment.
PPPoE passthrough:
Supports concurrent PPPoE clients
inside the modem and PPPoE clients
on the LAN devices.
PPPoE filtering of non‐PPPoE packets between WAN and LAN
Support filtered non‐PPPoE packets.
Auto clean up of remote stalled PPP sessions at BRAS
IpoE
Support dhcp and static ip config
Transparent bridging between
all LAN and WAN interfaces
WAN to WAN blocking in bridgemode
Ethernet as WAN
Networking :
Full Cone NAT
DMZ Host
ALGs :
FTP
TFTP
SIP
RTSP
H.323
Port Triggering
PPTP
IPSec/VPN and IPSec/L2TP
VPNs :
IPSec VPN
L2TP client
PPTP client
Firewall/ Filtering
Stateful Inspection:
Denial of Service suppression : ARP, Ping, Ping of Death, Land,
SYNC, Smurf, unreachable, teardrop,
SYN flood, fragggle, echo.
Packet filtering :
Packets can be blocked based on
interface, mac address, IP address,
protocol, and port number.
LAN side firewall:
By default, LAN side firewall is disabled
Parental Control
Time of day usage restriction
URI/URL Filtering Supports INCLUDE and
EXCLUDE modes
QoS:
IP/Bridge/802.1p
Rate Control on upstream traffic
Support SP, WRR,WFQ priority VLAN
stacking (Q-in-Q)
Routing:
RIP v1/v2 :Enable RIP over multiple WAN interfaces
Policy Routing: Routes packets based on criteria other than destination IP address
IGMP :
Proxy and snooping
IGMP v2 and v3
Support for IPv6
IPv6
IPv6 Ready Logo Certified
IPv6 Firewall
IPv6 capable apps: telnetd, ftpd, sshd, httpd